SOLO
SOLO ( Power supply not included )
US $289.00
SOLO + Power supply CPS9V500
US $312.90
US $289.00Add to cart
Trifecta of go-to effects for soloing with Doubler, Echo and Reverb all in one pedal.
SPECIFICATIONS
| PEDAL TYPE | ECHO/VERB/DOUBLER |
| POWER CONNECTORS | 5.33mm Barrel |
| POWER SUPPLY INCLUDED | Not Included |
| POWER SUPPLY | CPS9V500 (not included) |
| CURRENT DRAW | 180mA |
| BATTERY | None |
| INPUT JACK | 1/4'' |
| OUTPUT JACK | 1/4'' |
| INPUT OHM | 1 MΩ |
| OUTPUT OHM | 200Ω |
| OUTPUT LEVEL | 14.5dBu - 12.3dBV |
| BYPASS | Buffered Bypass |
| TEST REFERENCE LEVEL | 0 dBu = 0.775 Vrms |
| ADDITIONAL FUNCTIONS | TAP Echo Tempo via 1/8” TS for Non-latching switch |
| DIMENSIONS | 120mm x 70mm (4.72 x 2.75 Inches ) |
| Country of origin | China |
| TAP TEMPO FOOTSWITCH |
| Footswitch not included |
| 1/8"(3.5mm) to 1/4"(6.35mm) Cable included |
| Switch should be any 1/4"(6.35mm) TS "non-latching" type |
| TESTED AND APPROVED MODELS ARE : |
| BOSS - FS5U |
| Harley Benton - Tap Tempo Switch |
The CHUG SOLO is aptly named because it provides the 3 most wanted effects for Soloing.
DOUBLER + ECHO + REVERB – Three top quality digital effects!
The concept is very practical – set up all your effects for soloing in a single pedal.
• DOUBLER: The doubler is effectively a very lite chorus effect to “thicken” single notes.
• ECHO: Creatively filtered Echo sound creates delay for solos that does not “get in the way” of your dry signal tone. Goes from slap-back short to super long 2 second delay.
• REVERB: Highly tailored room emulation based on our favorite studio gear allows a variable sized space mixed with dry signal to make your solos larger than life.
• TAP: via the 1/8” input, with included 1/8” to 1/4” cable, any non-latching footswitch (not included) allows you to tap the tempo desired for the Echo time – super useful in a live setting.
CONNECTIONS ARE POWERFUL…
Please go to the manual last page to see the diagram on connections.
There are some really powerful options.
You can use in front of an amp, guitar in, mono or stereo out.
-or-
*Ola’s configuration: plug into input 1 with guitar and output 1 into amp, that makes only the doubler go to the front of the amp. Then, connect input 2 and output 2 into the loop of your amp, making the time-based effects only in the effects loop. This is the best implementation with an amp.
The CHUG SOLO is the new standard for having a solo effects chain that is easy and sounds amazing.
OLA'S FAVORITE SETTINGS
Liquidation
Slap me back
For the Cleans
Check out FAQ Section here
